3. How To Set The Unit
3.1 Control panel
Display
Shows the various menus and selected functions
Button
MENU
Selects the programming functions
UP
To go forward in the selected functions
DOWN
To go backward in the selected functions
ENTER
Confirms the selected functions
Mains input
Connection to the power supply.
DMX input/output
For DMX 512 linking. Use a 3-pin XLR cables to link to the controller or to
other units.
3.2 Main Functions
To select any of the given functions, press the
MENU
button up to where the
required function is showing on the display. Select the function by
pressing
the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to change the mode. Once the required mode has been selected,
press the
ENTER
button to confirm. To go back to the functions without any
changes, press the
MENU
button again. Press and hold the
MENU
button
for one second or wait for one minute to go back to the main menu.
The main functions are as below:
Menu
ADDR
001-512
CHND
1CH/7CH
SLND
MAST
SL1
SL2
SHND
SH1
SH2
SH3
SH4
SOUN
ON
OFF
SENS
000-100
LED
ON
OFF
DISP
→
INVERT
PAN INVERT
NO
YES
TILT INVERT
NO
YES
TEST
VER
RSET
