Equinox Systems EQLED002, Руководство пользователя

Страница: 2 / 8

1. Safety Instruction
WARNING
P
lease keep this User Guide for future consultation. If you sell the unit to
another user be sure that they also receive this.
Unpack and check carefully that there is no transportation damage before
using the unit.

Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to
avoid electric shock.

The unit is for indoor use only. Use only in a dry location.

The unit must be installed in a location with adequate ventilation, at
least 50cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.

Disconnect the mains power before replacement or servicing.

Make sure there are no flammable materials close to the unit while
operating as they may cause a fire hazard.

Always use a safety cable when installing this unit. Do not carry the unit
by its head only, always carry it using the base.

The maximum ambient temperature is to: 40 . Don’t operate it where
the temperature is higher than this.

In the event of a serious operating problem stop using the unit
immediately. Never try to repair the unit by yourself. Repairs carried out
by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance center. Always use the same
type spare parts.

Do not touch any power cables during operation as the high voltage may
cause an electric shock.
Warning

To prevent or reduce the risk of electrical shock or fire, do not expose
the unit to rain or moisture.
Do not open the unit within five minutes after switching off.

The housing and lenses must be replaced if they are visibly damaged.
Installation
The unit should be mounted via its screw holes onto the bracket. Always
ensure that the unit is firmly fixed to avoid vibration and slipping while
operating. Make sure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times of the unit’s
weight. Always use a safety cable that can hold 12 times the weight of
the unit when installing the fixture.
The equipment must be installed by professionals and it must be
installed in a place where it is out of the reach of people and no one can
pass by or under it.
Please read the instructions carefully as they include important
information about installation, usage and maintenance.