Equator Super Combo EZ 4400N, Руководство пользователя

Страница: 4 / 28

2
Installation
1. Non-removal of shipping rods, causing vibration / internal damage.
2. Non-adjustment of feet to level machine, causing vibration / internal damage.
3. Non-removal of exhaust vent plate at the back while using Venting Dry mode, causing excess
heat and resulting in damage to internal components.
4. Using incorrect length of venting i.e more than 10 feet unless used with a booster fan
5. Not conforming to minimum space requirements for Built-in installation, causing excess heat
and resulting in damage to internal components.
6. Installation in a corrosive environment
7. Incorrect water pressure i.e below 7.25 psi or above 145 psi
8. Incorrect water inlet hose installation (use only factory supplied hoses with metric threads on
the L shaped side to fit water valves)
Maintenance
1. Non-cleaning of coin trap for debris, causing the unit to not drain out water and resulting in
drain pump malfunction.
2. Non-cleaning of vent fan & exhaust hose for lint, causing the unit to not dry properly.
3. Improper maintenance (such as but not limited to scale build-up, freeze damage, or vent
blockage)
Damage
1. Breakage of cosmetic parts eg. Door handle, knob.
Other
1. Accident, abuse or misuse
2. Using of solvents to clean the machine or wash clothes causing damage.
3. Misapplication of this product e.g. Use in a non household/commercial
environment.
4. Any other cause not due to defects in materials or workmanship
5. Problems or damage due to fires, flooding, electrical surges, freezing or any
acts of God
6. Any damage cause by poor water quality
7. Operating the appliance with anything other than potable water at all times
8. Force majeure
THE FOLLOWING WORK ARE NOT COVERED UNDER WARRANTY:
In no event shall Consolidated Brands be liable for incidental or consequential damages or for
damages resulting from external causes such as abuse, operation misuse, neglect, alterations,
normal wear and tear, incorrect voltage or acts of God. This warranty does not cover service calls
which involve defective workmanship, damage due to other products while combined use with this
product or materials covered by this warranty. Accordingly, diagnosis and repair costs for a service
call which involves defective workmanship or materials will be the responsibility of the consumer-
owner.
EXCLUSIONS
Most work is covered. The defining factor is has the machine malfunctioned (Consolidated Brands
is responsible) or has the customer omitted or done something to cause or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.