EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: [email protected]
Skyjack SJIII DC Scissor
Plug and Play
Installation Manual
REV 1.2
07/10/2020
Model6253 OverWatch
™
Installation Manual
Document # DO001246
|
10 of 19
|
7.
Drive and Elevate
Connections:
On the back the
Drive/Elevate switch,
Locate the three terminals
that are not used.
2. Using the M3 screw
provided, install the
Violet
wire from the
OverWatch™ Harness to
the switch block
Top
terminal.
3. Using the M3 screw
provided, install the Red
cable from the
OverWatch™ Harness. to
the switch block
Middle
terminal.
4. Using the M3 screw
provided, install the
Orange
wire from the
OverWatch™ Harness to
the switch block
Bottom
terminal.
8.
Connect the 8-Pin
connector from the
Operator Sensor and the
12-Pin connector from the
OverWatch™ Harness,
into the Control Module
and re-fit the joystick back
into the enclosure.