30
•
Turn the Wall Thermostat over to remove or insert
the batteries according to the illustration.
•
After removing the old batteries, please wait ap-
prox. 10 seconds before inserting the new ones.
•
You can now enter two LR03 batteries (Micro/AAA)
into the battery compartment, making sure they
are the right way round according to the drawings.
•
Put the Wall Thermostat back into the frame.
An empty battery symbol (
) indicates that the bat-
teries need to be replaced. If, in addition, a V or S are
displayed, the batteries of a taught-in Heating Ther-
mostat (V) or Window Sensor (S) have to be replaced.
Never recharge standard batteries. Doing so will pre-
sent a risk of explosion. Do not throw the batteries
into a fire. Do not short-circuit batteries.
6. Setting date and time (dAt)
After inserting or replacing batteries the firmware version
number will be shown briefly. Accordingly, date and time will
be requested automatically. Settings can be changed with
the (
+
) and (
-
)
buttons and confirmed with the OK button.
Year:
Month and Day:
• Set the year, month and date and confirm each set
-
ting with the OK button.
