60
61
Teach-in:
Teach-in:
A soon as a component has been taught-in to a
central control unit, it can only be connected to
other components via this unit.
Each component can only be taught-in to one CCU.
During teach-in, please make sure you maintain a
distance of at least 50 cm between the HomeMatic
devices and the central control unit.
To teach-in your device to the central control unit, proceed
as follows:
• Open the “WebUI” user interface in your browser. Click
the “Teach in devices” button on the right-hand side of
the screen.
• To activate teach-in mode, click “BidCoS-RF teach-in
mode”.
• Teach-in mode remains activated for 60 seconds. An in-
formation box shows how much teach-in time remains.
• Meanwhile, please activate the teach-in mode of the
HomeMatic Room Thermostat to teach-in as well.
• Therefore, press and hold the boost button ( ) for at
least 3 seconds until the display switches back to teach-
in mode.
> 3 Sec.
• The antenna symbol ( ) is displayed, along with the
teach-in time remaining in seconds. The teach-in time is
30 seconds.
• After a short time, the newly taught-in device will appear
in the inbox of your software interface. The button „Inbox
(x new devices)“ indicates how many new devices have
been taught-in successfully.
• If required, you can teach-in additional devices by re-
peating the steps described above for each device.
• Now configure the newly taught-in devices in the inbox
as described in the next section „Configuring newly
Configuring newly taught-in devices:
Once you have taught-in your room thermostat to the
HomeMatic Central Control Unit, it will be moved to the
