background image

                                                                                                                                                                     

JA12132021

 

     

                                            

www.epvscreens.com

                      

   U-00222

 

  

         

 

 

 

 

 

Polar Star Special Edition Series 

Ceiling/Ambient Light Rejecting (CLR

®

/ALR) Fixed Frame Screen 

USER’S GUIDE

 

V 2.1 

Product Description  

The 

Polar Star® Special Edition Series

 is a fixed frame projection screen from EPV Screens. It has a 

hand wrapped velvet covered frame and a tension system for attaching the material for improved flatness.

 

The screen material included is our 

award winning ISF Certified 

Polar Star® which is a front projection 

material, precisely formulated for environments with minimal control over room lighting. It was designed 
to 

enhance  picture  brightness

offer  accurate  color  fidelity

,  and 

improve  contrast  levels

.  The  Polar 

Star®  is  best  for  family  rooms,  educational  facilities,  conference  rooms,  house  of  worship  or  any 
applications in which incident light is a factor. 

 

In order for the Polar Star

®

 to maintain its projection qualities and optimum performance please refer to the list 

below for proper maintenance and cleaning. 

 

Use a dry microfiber cloth to remove dust from the screen’s surface.   

 

When cleaning, use a damp microfiber cloth with warm water to remove any marks. 

 

Never rub or apply pressure when cleaning the surface. 

 

Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface. 

 

In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any 

other sharp or abrasive objects.  

 

 

Содержание Polar Star Series









Отзывы: