JA12132021
U-00222
7
Projector Tabletop:
Make sure the projector (light in) is angled
(ϴ1)
to reflect
(ϴ2)
at the mirror-opposite
angle (light out) to align with the viewer’s eye level.
Images are not up to scale and are for illustrations purposes only
.
Note
: Improper installation will result in light loss and produce a dark image. This is due to the projector’s light
reflecting in the wrong direction.
Installation
Step 11
:
Measure the overall length and height of the frame and drill holes for the top brackets. Line up the wall
brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not
installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws with a
screwdriver. Make sure the brackets are leveled.
Model/Size
X = Wall bracket distance
X1 = Bracket hole distance
Y = Top/Bottom Wall Bracket Height
92”
1100mm (43.30”)
30mm (1.18”)
1180mm (46.46”)
100”
1170mm (46.06”)
30mm (1.18”)
1280mm (50.39”)
110”
1280mm (50.39”)
30mm (1.18”)
1410mm (55.51”)
120”
1390mm (54.72”)
30mm (1.18”)
1530mm (60.24”)
135”
1550mm (61.02”)
30mm (1.18”)
1720mm (67.72”)
150”
1720mm (67.72”)
30mm (1.18”)
1900mm (74.80”)
Don’t lock the screw for
bottom brackets to allow the
screen to move up/down.
j.
k.
Diagonal Sizes of 150” and below use 4 x wall brackets
