JA02132020
U
-00153
4
Step 5
: Secure the elbow joints by fastening them with
M4x7 screws (
g)
, 4 at each corner.
Screen Material
Step 6:
Put on the
white gloves (p)
and carefully unroll the screen material on a clean surface from the roller to the
other side as shown below. The back side of the screen material should be placed upwards.
T
hen place a
bottom grommet
(r)
on the screen material’s eyelet and snap in the
top grommet
(s)
as shown below.
Repeat the process for all eyelets.
Step 7:
Carefully and gently place the assembled frame on top of the screen material in the marked areas as shown
below. Make sure to not allow the angle edge of the frame to come in direct contact with the screen material to
avoid puncturing it.
2. Hardware Parts List
a.
b.
c.
d.
e.
f.
g.
h.
i
j.
k.
l.
m.
Back side
*Make sure the frame corners are positioned
in the marked areas of the material.
Back Side
g.
Front
r.
s.
