PRODUCT WHITE PAPER
http://www.EPVscreens.com
9
Elite Screens Inc. |Elite Screens Europe GmbH | Elite Screens France S.A.S. | Elite Screens India| Elite Screens Japan
Elite Screens China Ltd. | Elite Screens Taiwan Corp. | Elite Screens Australia
C. Hidden Mount
1. Refer to the installation procedures for wall mount or ceiling mount for instructions.
4.7 Standard Accessories
A. RF remote
B. IR remote
C. Extended IR
sensor
D. 5-12 volt
tirgger
4.8 Operation
Electric current
: The screen may operate on 100V/110V/220V depending on region.
Caution
: The screen’s motor is equipped with a thermal heat protector which will cause the motor
to stop running and prevent overheating if it is in continuous use for more than four minutes.
When this occurs, please allow the motor to cool down and use again after 15 minutes.
1. Plug the screen’s power cord to a power outlet.
2. Once the screen has power you’ll be able to control it with the IR or RF remote.
4.9 Control System
The
Polar Max Tension Series
has
Infrared
and
Radio Frequency
receivers. You can control the
screen’s
UP/STOP/DOWN
positions utilizing either the IR (Infrared) or RF (Radio Frequency)
remotes.
1.
IR remote control:
The IR remote control requires line-of-sight to the IR sensor. Make sure to
point the IR remote directly to the
extended IR sensor
(see step 3 for installation).
Note
: a. The IR remote has a range of 15 feet.
b. The IR sensor must not be covered or blocked.
2.
RF remote control
: The RF remote does not require line-of-sight and can be used up to 50ft.
