![background image](http://html1.mh-extra.com/html/epv/pmx106ht2-e12/pmx106ht2-e12_manual_2420313011.webp)
PRODUCT WHITE PAPER
http://www.EPVscreens.com
11
Elite Screens Inc. |Elite Screens Europe GmbH | Elite Screens France S.A.S. | Elite Screens India| Elite Screens Japan
Elite Screens China Ltd. | Elite Screens Taiwan Corp. | Elite Screens Australia
4.
5-12 volt trigger:
Connect the mini jack plug end to the 5-12 volt trigger port (see image above)
and the other end to your projector’s output port to synchronize the projector’s power cycle to your
screen. Connection to the projector’s trigger port is not included. Refer to the diagram below for
wiring instructions. Contact your projector’s manufacturer for proper 5-12 volt trigger cable
information.
The screen should automatically DROP when the
projector is turned ON and RETRACT when
the projector is turned OFF.
You can test the operation using a 9-volt battery.
5.
UP/DOWN manual control buttons
(located on left side end cap)
6. RS232
Press and hold the UP button to retract the screen
Press and hold the Down button to deploy the screen
Press the STOP button first on the
remote prior to using the manual