Modello - Modèle - Model
Modell - Modelo
GLEE 40
GLEE 43 LITE / PRIME
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
22/76
N° DOC
UM000323
7.
NOTES AND WARNINGS
The appliance described in this manual conforms with Machine Directive 200/42/CE.
The content of this manual is technical and the property of EPTA s.p.a. It is forbidden to
reproduce, distribute or modify entirely or partially its content without written authorisation.
The owner company safeguards its rights pursuant to legislation in force.
Read the manual carefully and adhere to the contents before installing and using
the appliance.
The company cannot be held in any way liable for any damage to people, animals or the
product conserved in the event of:
•
Improper use of the equipment or use by unsuitable or unauthorised staff.
• Incorrect installation or power supply not suitable for the appliance.
• Non-compliance with this manual.
• Non-compliance with the maintenance program.
•
Unauthorized modifications to the appliance.
•
Installation of non-original spare parts on equipment.
•
Installation and use of the equipment for aims differing from those specified in this
manual.
• Tampering with or damage to the power supply cable.
Responsibility for application of the safety provisions outlined below is the responsibility of
the technical staff responsible for the activities planned on the equipment, who must ensure
the authorised staff:
•
Are qualified to perform the task requested
• Know and strictly comply with the provisions contained in this document
•
Know and apply the general safety standards applicable to the equipment.
Tampering with or unauthorised replacement of one or more parts of the equipment, use of
accessories that change its use and use of spare parts differing from those recommended can
cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power socket and
however no guard (grids, casings) should be removed by unqualified staff; strictly avoid
operating the freezer with these guards removed.
8.
USE
THE APPLIANCE IS SUITABLE FOR FREEZING PRE-PACKAGED PRODUCE.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-PACKAGED
PRODUCTS.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-PACKAGED
PRODUCTS.
THIS APPLIANCE IS ONLY DESIGNED FOR USE AT A MAXIMUM ALTITUDE
OF 2000 METRES ABOVE SEA LEVEL.
THE APPLIANCE CANNOT BE USED FOR THE PRESERVATION OF
PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the
equipment itself due to display of products other than the afore-specified.
