Modello - Modèle - Model
Modell - Modelo
EXTRA SLIM COOL EMOTION
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
14/52
N° DOC
UM000300
1. DISPOSAL OF USED MATERIALS
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH
EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health
deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant
savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-
out wheeled dustbin.
The symbol on the product or on the packaging indicates the product must not be considered normal
domestic waste, but must be brought to an appropriate collection point for recycling of the electrical
and electronic equipment.
By disposing of this product appropriately, you contribute to avoiding potential negative consequences,
which could derive from inadequate disposal of the product.
For more detailed information on recycling of this product, contact the municipality office, the local
waste disposal service or the shop where you purchased the product.
The cabinet contains oil, inflammable cooling gas, plastic and metallic components and glass.
WARNING!
Polyurethane insulation uses CICLOPENTHANE as expander, that doesn’t affect the environment but
is inflammable.
To guarantee the same respect when it’s disposed of , never abandon the equipment outside. Don’t
throw the packaging material from your equipment in the rubbish but sort the various materials:
eg.polystyrene, cardboard, plastic bags. The demolition of the cabinet and the recovery of the
component materials must be carried out according to the local regulations in force in this matter.
2. GENERAL INFORMATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then dry it with a
soft cloth; for the glass parts only use specific products, avoiding the use of water which can leave on the glasses
limestone residues.
It is fundamental to comply with the distances indicated (cm) for correct
installation of the equipment.
10
cm
• It is necessary that the capacitor unit is in the free air exchange condition, therefore
the ventilation zones must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power
socket.
• Never place containers of liquid on or immediately above the ticket counter; should
the content spill out, it would damage the counter.
• The measured sound pressure emanated A is below 70dB (A).
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
