Enabling Wi-Fi Direct Mode
Parent topic:
Wi-Fi or Wired Networking
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and a computer
or other devices without a wireless router or access point.
Note:
You may need to enable the Wi-Fi Direct setting in the
Advanced Settings
menu before you can
enable Wi-Fi Direct mode.
1.
Press the up or down arrow buttons, select
Wi-Fi Setup
, and press the
OK
button.
You see this screen:
2.
Press the down arrow button, select
Wi-Fi Direct Setup
, and press the
OK
button.
3.
Press the down arrow button, select
Connection Setup
, and press the
OK
button.
4.
Press the down arrow button, select
Change Password
, and press the
OK
button.
5.
Press the
OK
button.
Note:
If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the password.
6.
Enter a Wi-Fi Direct password using the control panel buttons.
Note:
Your password must be at least 8 and no more than 22 characters long.
29
Содержание WorkForce WF-7110
