Epson WF-R8590, Руководство по обслуживанию

Страница: 18 / 43

Confidential
Power-On Sequence 17
EPSON WF-R8590/WF-R8591/WF-R8593 Revision F
1.2 Power-On Sequence
This section describes the power-on sequences for this product. The preconditions are as follows.
 Normal power-on sequence

No error occurred at the last power-on, and the power was turned off normally.

Initial ink charge has finished and every pack has sufficient ink.

No paper on the paper path.

The Printhead is capped by the cap of the Ink System.

CR Lock is engaged normally.

This indicates the Simple Sequence.

PG position is set to PG 1.

Option Cassette Unit is not installed.
The following explains how to use the simplified diagrams in Table 1-1 or Table 1-2. The
diagrams show the movement of each component as seen from the front of the printer.
Figure 1-4. Movement of Components
Table 1-1. Power-on Sequence
Operation
Movement of
Components
CR
Motor
rotation
PF
Motor
rotation
ASF
Motor
rotation
1. APG reset
1-1.If PG is other than 1, the APG Motor rotates to set PG to 1.*
9
--- --- ---
2. Printhead initialization and fuse inspection
2-1.Initializes the Printhead, and checks the fuse on the printer control
circuit board.
*1
--- --- ---
3. Seeking the home position
3-1.To identify the CR Unit position, the CR Motor rotates
counterclockwise and it confirms the CR Unit touches the Right Frame
slowly. It regards the point when the CR Unit touches the Right Frame
as the position specified steps away from the home position, and sets it
as the origin.
CCW --- ---
3-2.If it judges the CR Unit is in the home position, the PF Motor rotates
clockwise and resets the CR lock.
--- CW ---
3-3.The PF Motor rotates counterclockwise and sets the CR lock.
--- CCW ---
The condition of the CR lock
Red: CR lock is set
White: CR lock is released
The above shows the CR lock is set.
Carriage movement
Right-pointing arrow: Moves to the 0-digit side
Left-pointing arrow: Moves to the 130-digit side
The figure shows the carriage is moving to the 0-digit side.
Digit number of CR
PF Roller
Carriage
The rotation direction of
the ASF Motor
Clockwise:
Paper is fed normally
Counterclockwise:
Paper is fed backward
The above shows clockwise
rotation.
The rotation direction of
the PF Motor
Clockwise:
Paper is fed normally
Counterclockwise:
Paper is fed backward
The above shows clockwise
rotation.