You cannot change settings that have been locked by your administrator.
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from the following and then
follow the instructions on the LCD panel.
❏
Router
❏
Wi-Fi Direct
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
❏
Wired LAN/Wi-Fi Status
❏
Wi-Fi Direct Status
❏
Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏
Device Name
❏
TCP/IP
❏
Proxy Server
❏
IPv6 Address
❏
NFC
❏
Link Speed & Duplex
❏
Redirect HTTP to HTTPS
❏
Disable IPsec/IP Filtering
❏
Disable IEEE802.1X
Web Service Settings
Select the menus on the control panel as described below.
Settings
>
General Settings
>
Web Service Settings
You cannot change settings that have been locked by your administrator.
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
User's Guide
Preparing the Printer
38