WF-C20590 Installation Guide
Installing the Optional Units
38
23. Remove the screw (S1: ) that secures the Lock Lever.
24. Put your hand on the left side of the Bridge Unit, and lift the unit slightly until the
Lock Lever is positioned at the lock position.
25. Replace the screw (S1: ) to secure the Lock Lever.
C H E C K
P O I N T
Do not attempt to move the Lock Lever until after you have
adjusted the height of the Bridge Unit. In the next step, adjust the
position of the Bridge Unit to secure the Joint Hooks and lock the
Bridge Unit.
Lock Lever
No.
Screw type
S1
C.B.S-TITE R, SCREW, 3X8, F/ZN-3C
Lock Lever
Locked position
C H E C K
P O I N T
When the Lock Lever is moved to the lock position, the lever
stays at the center position even after you release your finger
from the lever.
No.
Screw type
S1
C.B.S-TITE R, SCREW, 3X8, F/ZN-3C
Lock Lever
(locked position)
Place your hand here
PRELIMINARY
Содержание WF-C20590 Series
Страница 1: ...WF C20590 Installation Guide PRELIMINARY ...