Epson UB-E04 Скачать руководство пользователя страница 35

Страница: 35 / 43

Chapter 5 Product Specifications

Product Specifications

This chapter describes the specifications of the UB-E04.

Software Specifications

Supported Protocols

The UB-E04 supports the following protocols.

Printing Protocols

The UB-E04 uses the following printing protocols.

•

LPR:

Transfers print data.

Protocol

Explanation

IP, ARP, ICMP, UDP, TCP

Basic transmission protocols for various functions. (They are used by the
various following higher protocols.)

LPR, TCP Socket Port

Protocols for printing.

DHCP, APIPA

Protocols used to automatically set information such as the IP address.

SNMP, ENPC

Protocols used to acquire product information.

HTTP/HTTPS

•

Protocols used in the Web browser performing product settings.

•

Protocols for printing with ePOS-Print.

•

Protocols used for updating the UB-E04 firmware. (Only supported by
HTTP)

DNS, DDNS,
mDNS (Bonjour)

Protocols for name resolution.

Port number

515

Maximum simultaneous
connections

Number of connections that
can print

1 (Other users must wait until the printing has completed.)

Timeout

Default: Approx. 90 sec.
Can be set using the network configuration tool (EpsonNet Config).

Job cancellation

Not supported

Banner printing

Not supported

Print queue

Not supported

Содержание UB-E04












































Результаты поиска

Содержание UB-E04

Отзывы:

Похожие инструкции для UB-E04

Бренды по названию

Популярные бренды

Epson UB-E04, Справочное руководство

Результаты поиска

Содержание UB-E04

Отзывы:

Похожие инструкции для UB-E04

Бренды по названию

Популярные бренды