Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U330x)
3
4) Port information when using Ethernet port
Not applicable
2.3. Device Settings
The following explanation is about the settings for TM-U330x.
2.3.1. Usable Device Specific Settings
For the TM-U330x, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of “EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”.
Tab Settings
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
*1
Ignore firmware version check
General
Output complete timeout
Paper Type
Paper
Paper Width [mm]: LineWidth [dot]: LineCharsList
Bitmap TMFlogo...
Halftone: Method
Halftone: Brightness
Color Bitmap
Color: Primary
ERROR
OFFLINE
Log file name (full path name)
Status Log
Maximum file size [KB]
Options NearEndSensor
Receipt Characters per Line
Receipt Line Spacing [dots]
Printing Properties
CharacterSet [CodePage Number]
*1
The settings can be changed when using a connection other than serial.
2.3.2. Options
“NearEndSensor” check box
For the models, which are supported NearEndSensor function as an option,
marking the check box could set NearEndSensor function.
