Epson TM-U200D series, Руководство оператора

Страница: 30 / 53

Setting Up the Printer 1–19
4. Use the following tables to set the DIP switches. Numbers
starting with 1 are in the first set, and numbers starting with 2
are in the second.
Model with serial interface DIP-Switch Functions
DIP Switch Set 1
Switch Function ON OFF
1-1 Data reception error Ignored Prints”?”
1-2
Receive buffer
capacity
40 bytes Approx. 1K
bytes
1-3 Handshaking XON/XOFF DTR/DSR
1-4 Word length 7 bits 8 bits
1-5 Parity check Yes No
1-6 Parity selection Even Odd
1-7 Baud rate 4800 BPS 9600 BPS
1-8 Busy condition
Sets the printer to go
BUSY when the
receive buffer is full
Sets the printer to
go BUSY when it is
offline or the
receive buffer is full
DIP Switch Set 2
Switch Function ON OFF
2-1 Print column selection
7
×
9 font/9
×
9 font
42/35 40/33
2-2 Internal use. Setting must not be changed. (Fixed to Off).
2-3 I/F pin 6 reset signal Enabled Disabled
2-4 I/F pin 25 reset signal Enabled Disabled
2-5 Internal use. Setting must not be changed. (Fixed to Off).
2-6 Internal use. Setting must not be changed. (Fixed to Off).
2-7 Internal use. Setting must not be changed. (Fixed to Off).
2-8 Undefined.