Epson TM-T88VI-DT2, Техническое справочное руководство

Страница: 62 / 165

62
Chapter 5 TM-DT Software System Development
5
Checking the print results
When the spooler is disabled
After printing, the job ID and print results are returned to the application. Also, when printing cannot be per-
formed, the job ID, print results, and error code are returned.
When the spooler is enabled
•
When print data cannot be spooled:
[JobID, Print result = false, Error code = EX_SPOOLER (spooler stopped)] is returned to the application.
•
When print data can be spooled:
After spooling the print data, [JobID, Print result = true] is returned to the application. Printing is not per-
formed at this point. Make an inquiry from the application to this product to confirm if printing was per-
formed.
Checking the print results from the application
If inquired of print result from the application, the product returns the following information.
•
Printing succeeded: [JobID, Print results = true]
•
Printing succeeded: [JobID, Print result = false, Error code = Printer status]
•
Printing or print forwarding: [JobID, Print result = false, Error code = Printing]
Setting Items
Spooler and forward printing are configured on the same page.
•
When this product is turned off, data in the spooler and the log storage area is cleared. For
detail, see
"TM-DT Software Specification" on page 104 .
•
When printing cannot be performed with this products spooler or print forwarding, the print
data is cleared. If printing has not been completed when checking in the application, we rec-
ommend reprinting.
Setting Items
Enabling / Disabling ePOS-Device Service ( page 54 )
•
Enabling ePOS-Device Service
Web service ( page 82 )
•
Enabling spooler
Print forwarding ( page 88 )
•
Retry count
•
Forwarding message
•
Print forwarding route