Epson TM-T88VI-DT2, Техническое справочное руководство

Страница: 124 / 165

124
Chapter 8 Replacement of the TM-T88V-DT
8
Compatibility
Printing
The printing and character specifications are the same as those of the TM-T88V-DT. Without special configura-
tions, the TM-T88VI-DT2 prints the same results as the TM-T88V-DT prints.
Print Density
The print density of the TM-T88VI-DT2 is set in the software setting mode, like the TM-T88V-DT.
Set the density the same as for the TM-T88V-DT to print in the same print density.
Number of Head Energizing Parts
For the TM-T88VI-DT2, the default setting of the number of head energizing parts is “One-part energizing.” It
does not usually need to be changed.
Printable Area (for 80 mm Width Paper)
The printable area (left/right margins, print start position from the autocutting position, print start position
from the manual cutting position) of the TM-T88VI-DT2 is the same as that of the TM-T88V-DT.
Cutting Method
The TM-T88VI-DT2 uses the partial cutting method (cutting with one point in left edge left uncut) as does the
TM-T88V-DT.
Manual Paper Feed
As same with the TM-T88V-DT, manual paper feed is not possible with the TM-T88VI-DT2.
TM-T88VI-DT2 TM-T88V-DT
Number of head energizing part
•
One-part energizing
•
Two-part energizing
•
Four-part energizing
•
One-part energizing
•
Two-part energizing
•
Four-part energizing