background image

35

English

the fulfillment of which facilitate the due performance of this agreement, the breach of which would 
endanger the purpose of this agreement and the compliance with which a party may constantly trust in (so-
called "cardinal obligations"). In other cases of slight negligence, the manufacturer or installer or Microsoft 
will not be liable for slight negligence.

e. Other regions.

 See (aka.ms/variations) for a current list of regional variations

12. Additional Notices.

a. Networks, data and Internet usage.

 Some features of the software and services accessed through the 

software may require your device to access the Internet. Your access and usage (including charges) may be 
subject to the terms of your cellular or internet provider agreement. Certain features of the software may help 
you access the Internet more efficiently, but the software’s usage calculations may be different from your 
service provider’s measurements. You are always responsible for (i) understanding and complying with the 
terms of your own plans and agreements, and (ii) any issues arising from using or accessing networks, 
including public/open networks. You may use the software to connect to networks, and to share access 
information about those networks, only if you have permission to do so. 

b. H.264/AVC and MPEG-4 visual standards and VC-1 video standards.

 The software may include H.264/

MPEG-4 AVC and/or VC-1 decoding technology. MPEG LA, L.L.C. requires this notice:
THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1, AND THE MPEG-4 PART 2 VISUAL PATENT PORTFOLIO 
LICENSES FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN 
COMPLIANCE WITH THE ABOVE STANDARDS (“VIDEO STANDARDS”) AND/OR (ii) DECODE AVC, VC-1, AND 
MPEG-4 PART 2 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE SUCH 
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION 
MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE WWW.MPEGLA.COM

c. Malware protection.

 Microsoft cares about protecting your device from malware. The software will turn on 

malware protection if other protection is not installed or has expired. To do so, other antimalware software 
will be disabled or may have to be removed.

d. Limited rights versions. 

If the software version you acquired is marked or otherwise intended for a specific or 

limited use, then you may only use it as specified. You may use other programs with the software as long as 
the other programs directly support the manufacturer’s specific use for the device, or provide system utilities, 
resource management, or anti-virus or similar protection.

(i)

Academic.

 For academic use, you must be a student, faculty or staff of an educational institution at the 

time of purchase.

(ii)

Evaluation.

 For evaluation (or test or demonstration) use, you may not sell the software, use it in a live 

operating environment, or use it after the evaluation period. Notwithstanding anything to the contrary 
in this Agreement, evaluation software is provided “AS IS”.

(iii)

NFR.

 You may not sell software marked as “NFR” or “Not for Resale”.

13. Entire Agreement.

 This agreement (together with the printed paper license terms or other terms accompanying 

any software supplements, updates, and services that are provided by the manufacturer or installer, or Microsoft, 
and that you use), and the terms contained in web links listed in this agreement, are the entire agreement for the 
software and any such supplements, updates, and services (unless the manufacturer or installer, or Microsoft, 
provides other terms with such supplements, updates, or services). You can review this agreement after your 
software is running by going to (aka.ms/useterms) or going to Settings - System - About within the software. You 
can also review the terms at any of the links in this agreement by typing the URLs into a browser address bar, and 
you agree to do so. You agree that you will read the terms before using the software or services, including any 
linked terms. You understand that by using the software and services, you ratify this agreement and the linked 
terms. There are also informational links in this agreement. The links containing notices and binding terms are:

Windows 10 Privacy Statement (aka.ms/privacy)

Microsoft Services Agreement (aka.ms/msa)

Adobe Flash Player License Terms (aka.ms/adobeflash)

Содержание TM-T70II-DT2





































Отзывы: