Epson TM-T60, Руководство оператора

Страница: 39 / 85

Sets or cancels the user-defined character set.
• Only the lowest bit of
n is
valid.
When n =
< * * * * * * * 1 >
B
, the userdefined character
set is set.
W h e n n = < * * * * * * * O >
B
, the
u s e r d e f i n e d c h a r a c t e r
set is canceled (and the internal character set is set).
n 0
=
ESC &
ESC & s n m [a[p]sXa]m-n+1
Define user-defined characters
< 1 B >
H
< 2 6 >
H
< s > < n > < m > [ < a > < p 1 >
< p 2 > - - - < p s X a > ] m - n + 1
s = 3
Defines user-defined characters for ANK character codes.
- “s” specifies the number of bytes in the vertical direction.
- “n” specifies the beginning ASCII code for the definition
and "m" the final code. If only one character is defined,
use n = m.
- The allowable character code range is from ASCII code
< 2O >
H
to < 7E >
H
and the maximum number of characters
is 95.
l
“a” specifies the number of dots in the horizontal direction.
- “p” Is the dot data for the characters. The dot pattern for
a dots is in the horizontal direction from the left side. The
remaining dot pattern on the right side is space. The amount
of data to be defined is sXa.
- After userdefined characters are defined once, they are
available until another definition is made, until ESC @ is
- 3 2 -