Epson TM-S9000MJ страница 2 Скачать руководство пользователя

Страница: 2 / 104

Cautions

• No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form

or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of Seiko Epson Corporation.

• The contents of this document are subject to change without notice. Please contact us for the latest

information.

• While every precaution has been taken in the preparation of this document, Seiko Epson Corpora-

tion assumes no responsibility for errors or omissions.

• Neither is any liability assumed for damages resulting from the use of the information contained

herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third

parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of:

accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this

product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating

and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of

any options or any consumable products other than those designated as Original Epson Products or

Epson Approved Products by Seiko Epson Corporation.

Trademarks

EPSON is a registered trademark of Seiko Epson Corporation.

Exceed Your Vision is a registered trademark or trademark of Seiko Epson Corporation.

Содержание TM-S9000MJ









































































































Результаты поиска

Содержание TM-S9000MJ

Отзывы:

Похожие инструкции для TM-S9000MJ

Бренды по названию

Популярные бренды

Epson TM-S9000MJ, Техническое справочное руководство

Результаты поиска

Содержание TM-S9000MJ

Отзывы:

Похожие инструкции для TM-S9000MJ

Бренды по названию

Популярные бренды