Epson TM-300A, Руководство оператора

Страница: 47 / 75

[Notes]
l
•
It is possible to select multiple detectors for print control (to stop
printing.) In this case, if only one detector detects no paper, the
printer stops printing.
Printing is stopped after the current line is completed and the
paper is fed. (The printer goes OFF-LINE after printing stops.)
[Default]
n = 0
ESC c 5 n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
ESCdn
[Name]
[Format]
[Range]
[Description]
[Note]
[Default]
[Reference]
Enable/disable panel switch
<1B>H<63>H<35>H<n>
0 n 255
Enables or disables the panel switch.
l
Only the lowest bit of
n
is valid.
When
n
= <* * * * * * *1>B, panel switch is disabled.
When
n
= < * * * * * * * 0>B, panel switch is enabled.
l
If the panel switch is disabled by this command, the panel
switch is unusable. Therefore, paper feeding using the FEED
switch cannot be executed (except when the printer cover is
open)
n = O
Print and feed paper
n
lines
<1B>H<64>H<n>
O n 255
Prints one-line of data from the print buffer and performs
n
line
feeds.
l
Sets the print starting position to the beginning of the line.
l
The predetermined line spacing remains unchanged.
l
Printing speed slows down because this command causes the
carriage to move before feeding paper.
Not defined.
ESC 2, ESC 3
4 1