Epson TM-300A, Руководство оператора

Страница: 34 / 75

5-5 The Cover Open Detector
n n
The cover open detector operation
This printer has cover open detectors, located inside the cover.
If the cover is opened when the power supply is activated, the printer automatically
goes off-line and printing will be terminated (after the current line is printed).
n n
Returning the printer on-line
Close the cover to set the printer on-line.
NOTE:
l
Before printing, check that the cover are dosed properly.
5-6 Roll Paper End Detector
n n
Roll paper end detector
Located in the roll paper path. This detector detects paper out. However, roll
paper for which the end is glued to the roll core cannot be used. Roll paper semi-
automatic loading is possible depending on the combination of the roll paper end
detector and cover open detector. (See 3-2 Installing the Roll Paper)
n n
Detectors and printing
The printer will either stop or continue printing according to the ESC c 4 setting
when a paper-end is detected. The roll paper near-end detector and roll paper
end detector are both available. (Refer to 5-2 The PAPER LED)
When stop printing mode is selected, the printer automatically goes off-line when
the roll paper near-end detector or the roll paper end detector detects paper out.
Therefore, the printer should go on-line after setting the paper to restart printing.
Switching on-line is executed by closing the printer cover.
28