218
8.
If you are transporting the product, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the product.
9.
After the printer is moved, connect the power cable and turn on the printer.
10. Run a print head nozzle check and clean the print head, if necessary.
Parent topic:
Maintenance and Transportation
Related tasks
Checking the Nozzles Using the Product Control Panel
Cleaning the Print Head Using the Product Control Panel
Discharging Ink
If you need to move or transport your product when the temperature is 14°F (–10°C) or lower, you must
first discharge the ink to keep the print head in optimum condition.
Note:
The maintenance box needs enough capacity to discharge the ink. Replace the maintenance box
first if the remaining capacity is low.
1.
Turn on the product.
2.
Remove all the paper from the product.
3.
Press the
home button, if necessary.
4.
Select
Settings
>
Maintenance
>
Discharging/Charging Ink
>
Start
.
The ink begins to discharge. The power turns off automatically when the discharge process is
complete.
Caution:
Do not open any product cover or turn off the product while ink is discharging.
Parent topic:
Moving or Transporting Your Product
Related tasks
Checking Ink Cartridge and Maintenance Box Status on the LCD Screen
Содержание SureColor T3470
