Epson SureColor F9470 Скачать руководство пользователя страница 21

Страница: 21 / 207

• Allow ink packs that have been stored at low temperatures for an extended period of time to return to

room temperature for four hours before use.

• Refill the ink tank as soon as possible after opening an ink pack.

• When refilling an ink tank, use all of the ink in the ink pack at once.

Parent topic:

Printer Usage Guidelines

Related references

Ink Pack Specifications

Handling Media

Follow these guidelines as you handle or store media:

• Read and follow the guidelines provided with each type of media.

• Do not fold the media or otherwise damage its printable surface.

• Do not touch the printable surface. This prevents oil from your hands from causing print quality

problems.

• When handling media, hold it by both edges, preferably while wearing cotton gloves.

• Keep the media dry and avoid storage locations subject to direct sunlight, excessive heat, and high

humidity.

• Retain the media packaging materials so you can use it to store unused media.

• After printing, do not touch, rub, or scratch the printed surface to avoid removing the ink.

• Dry printed media completely before folding or stacking it, or the printed surface may be damaged.

• Keep printed media out of direct sunlight.

• Display and store printed media as instructed in the media documentation.

• When you are not printing on media, remove it from the printer and place it in its original packaging to

prevent deterioration.

Parent topic:

Printer Usage Guidelines

Storing Your Printer

Follow these guidelines if you need to store your printer for a long period:

• If the printer is not used for an extended period of time with the power off, clean the print head nozzles.

Turn the printer on at least once every two weeks to automatically clean the print head and prevent the
nozzles from clogging. If you do not turn on the printer for a long time, the printer may malfunction.

Содержание SureColor F9470
















































































































































































































Результаты поиска

Содержание SureColor F9470

Отзывы:

Похожие инструкции для SureColor F9470

Бренды по названию

Популярные бренды

Epson SureColor F9470, Руководство пользователя

Результаты поиска

Содержание SureColor F9470

Отзывы:

Похожие инструкции для SureColor F9470

Бренды по названию

Популярные бренды