Epson Stylus S20, Руководство по обслуживанию

Страница: 61 / 85

Epson Stylus C58/C59/ME 2/C79/D78/C90/C91/C92/D92/T20/T20E/T23/T26/S20/T10/T11/ME 30/T21/T24/T27/S21 Revision E
DISASSEMBLY/ASSEMBLY Disassembling Printer Mechanism 61
Confidential
4.5.11 Waste Ink Pads
† Part/Unit that should be removed before removing Waste Ink Pads
Upper Housing /Hopper /Main Board /Main Frame /EJ Frame Assy. /
Print Head /CR Scale/CR Motor/CR Unit/Timing Belt/Ink System/Power Supply
Board/EJ Roller/ASF Unit
†
Removal procedure
1. Remove the Waste Ink Pads (x8) from the sections indicated with to
of the Frame Base.
Figure 4-71. Removing Waste Ink Pads
C A U T I O N
When removing the Waste Ink Pads, be careful not to tear the tip
of the induction paper. If it is torn, replace the
induction paper.
„ When installing the Waste Ink Pads, be sure to insert ribs and
tabs of the Frame Base into the slots and notches of the pads.
„ When installing in the section (refer to Figure 4-72) , be
sure to match the positioning tabs and press until it clicks
to secure it in the right position.
„
When installing the Waste Ink Pads on the section , be sure
to lay the six parts one on top of another in the order shown in
the figure.
Figure 4-72. Installing Waste Ink Pads (1)
„ When installing the Waste Ink Pads on the section (B), make
sure to insert the tips of induction paper between the
and
pads.
Figure 4-73. Installing Waste Ink Pads (2)
A D J U S T M E N T
R E Q U I R E D
„ After replacing the Waste Ink Pads, perform the following
adjustment. (Refer to Chapter 5
“ADJUSTMENT” )
1. “Waste Ink Pad Counter” (only after replacement)
2. “Ink Charge”
3. “TOP Margin Adjustment”
4. “Head Angular Adjustment”
5. “Bi-D Adjustment”
6. “PF Band Adjustment”
Tips of induction paper