Epson Stylus Pro 7600 Photographic Dye Ink, Быстрое руководство по установке

Страница: 9 / 34

Assigning a Static IP Address | 5
Installing the Server Software
Follow the instructions in this section to install the software on the server.
They describe how to:
•
Assign a static IP address (see below)
•
Name the server (see page 6)
•
Install the Fiery Spark Server software (see page 6)
•
Connect the hardware key (page 7)
•
Install Command WorkStation ™ (see page 8)
•
Install ColorWise Pro Tools (optional, see page 11)
Before you begin, make sure you have:
•
Installed the EPSON printer driver (see your EPSON printer
documentation for instructions)
•
Connected the printer to the server using the USB interface (Stylus Pro
7600 and 9600) or the FireWire IEEE 1394 interface (Stylus Pro 10000
and 10600)
•
Closed all open programs and turned off any virus protection programs
Assigning a Static IP Address
1. Right-click
My Network Places
.
2. Select
Properties
.
3. Right-click
Local Area Connection
.
4. Select
Properties
.
5. Double-click
Internet Protocol (TCP/IP
).
If the server is using a DHCP connection, skip ahead to “Naming the
Server” on page 6.