4
Load the sheets in portrait orientation, with the whiter or glossier printable side face down.
Place the paper all the way back, against the right side of the tray.
Don’t load paper above the arrow mark inside the edge guide.
5
Adjust the paper tray and edge guide according
to the paper size. For small sheets, raise the paper
guide and move it to the edge of the stack.
6
Flip down the paper guide roller, then replace the
paper tray cover and adjust its length.
Note:
Make sure the roll paper support is not raised.
7
Press the paper source button until you see the cut sheet icon.
Any Questions?
Look here for answers:
Quick Reference Guide
Keep this book handy for instructions on loading paper, replacing ink cartridges and other
components, checking and aligning the print head, and what to do when you see a printer error
message. You can hang it on the side of your printer by using the included hook.
Printer Guide
Basic steps for using your printer. See Chapter 1 to install the printer software if you are connecting the
printer on a network.
On-screen
User’s Guide
Double-click the
ESP4880 User’s Guide
desktop icon for easy access to Epson Stylus Pro 4880
information.
On-screen
Network Guide
Double-click the
Epson Network Guide
desktop icon for instructions on configuring the printer
for a network.
On-screen help with your software
Select
Help
or
?
when you’re using your software.
Epson Technical Support
Internet Support
epson.com/support
Epson Preferred
SM
Limited Warranty Plan
(888) 377-6611. Make sure you have your Epson Preferred Unit ID number. If you have any difficulty
with this service, call (562) 276-1305. You can purchase a one- or two-year extended service plan
through your Epson authorized reseller or from Epson.
®
Need Ink and Paper?
For the best prints, use genuine Epson ink and paper. You can purchase them from an
Epson Professional Imaging authorized reseller. To find the nearest reseller visit
www.proimaging.epson.com
(U.S. sales),
www.epson.ca
(Canadian sales),
or call 800-GO-EPSON (800-463-7766). Or you can also purchase online at
www.proimaging.epson.com
(U.S. sales) or
www.epson.ca
(Canadian sales).
Epson and Epson Stylus are registered trademarks and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation.
Epson Preferred is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
The contents of this sheet are subject to change without notice.
© 2007 Epson America, Inc. 9/07
CPD-24504
Printed in USA
Windows
1
Make sure your computer and printer are turned on but the printer is NOT CONNECTED
to your computer.
Note:
If you see a Found New Hardware Wizard screen, click
Cancel
and disconnect the
USB cable.
2
Insert the Epson Stylus Pro 4880 printer CD.
Note:
With Windows Vista, if you see the AutoPlay window, click
Run Epsetup.exe
. When you see
the User Account Control screen, click
Continue
.
3
Click
Install
.
Note:
If you see message asking if you want to install
or run various installation programs, select
Continue
,
Continue Anyway
, or
Install this driver software
anyway
.
4
When you see a window asking you
to connect the printer, connect the
USB cable.
Note:
With Windows XP, if you see a
Found New Hardware Wizard screen
after you connect the printer, select
No,
not this time
and click
Next
. Then click
Next
again.
Note:
If installation doesn’t continue
after a moment, make sure you securely
connected and turned on the printer.
5
Follow the on-screen instructions
to install all the necessary software
and manuals, and place a link to the
Epson Professional Imaging Website on your desktop.
6
When you’re done, click
Exit
and remove the CD.
Load Roll Paper
1
Slide the black paper stop off the end of the spindle.
2
If the paper has a 2-inch core, remove the adapters by pressing the four tabs.
Note:
Make sure your hands are clean, and avoid touching the printable
surface of the paper. Try to handle paper by the edges. Make sure you don’t rub
or scratch the coating or dent the edges of the paper.
3
Position the roll so the paper unwinds as shown, then slide
it onto the spindle.
4
Slide the black paper stop back onto the spindle. Insert it firmly into
the end of the roll.
5
Open the roll paper cover.
6
Place the paper and spindle in the printer as shown,
with the black end on the left.
7
Make sure the printer is powered on and ready. Press the paper source button until the
or
roll paper icon appears.
8
Raise the roll paper support on top of the paper tray cover.
9
Release the paper lever.
10
Hold both sides of the paper and feed into the slot.
11
Feed the paper all the way through the printer
until it is aligned with the OTHERS
mark on the paper tray cover.
Align the right edge with the
vertical mark on the right side
of the tray cover. Then return
the paper lever to the secured
position and close the roll
paper cover.
Load Cut Sheet Paper
When you are ready to print on cut sheet paper, make sure you release the paper lever and wind up the
roll paper. Then return the paper to the secured position and close the roll paper cover. Also, make sure
you lower the roll paper support on the paper tray.
Note:
Some paper types cannot be used with the paper tray. You need to load them through the front or
rear manual feed slots. See the
Printer Guide
for details.
1
Remove the paper tray cover and flip up
the paper guide roller.
Note:
If your paper size is A3 or larger,
pull out the paper tray.
2
Slide the edge guide all the way to the left.
3
Thumb through a stack of
paper, then gently tap it on a
flat surface to even the edges.
OTHERS
Roll paper cover
Paper source button
Tab
Paper guide
