Epson Stylus CX5900 Series Скачать руководство пользователя страница 30

Страница: 30 / 36

Solving Problems

■

Clean the print head (

“Checking the print

head” on page 22).

■

Make sure you select the correct paper type
(

“Selecting Paper” on page 6).

■

Make sure the printable (whiter or glossier) side
of the paper is face-up.

■

The ink cartridges may need replacing
(

“Removing and installing ink cartridges” on

page 20).

■

Align the print head (

“Aligning the Print

Head” on page 23).

■

Clean the document table (

“Cleaning This

Product” on page 24).

Your printout is blurry or smeared.

■

Make sure the document is placed flat against
the document table. If only part of the image is
blurred, your original may be wrinkled or
warped.

■

Make sure the product is not tilted or placed on
an uneven surface.

■

Make sure your paper is not damp, curled, or
loaded face-down (the whiter or glossier
printable side should be face-up). Load new
paper face-up.

■

Use a support sheet with special paper or try
loading your paper one sheet at a time.

■

Load your paper one sheet at a time. Remove
sheets from the output tray so not too many
collect at a time.

■

Align the print head (

“Aligning the Print

Head” on page 23).

■

Make several copies without placing a document
on the document table.

■

Use only paper recommended by Epson and
genuine Epson cartridges.

■

Set the paper thickness lever to the

position for

most paper types. If you are printing on
envelopes, set the lever to the

position.

■

Clean the document table (

“Cleaning This

Product” on page 24).

Your printout is faint or has gaps.

■

Clean the print head (

“Cleaning the print

head” on page 23).

■

If you notice jagged vertical lines, you may need
to align the print head (

“Aligning the Print

Head” on page 23).

■

The ink cartridges may be old or low on ink.
Replace the ink cartridges (

“Replacing Ink

Cartridges” on page 19).

■

Make sure you select the correct paper type
(

“Selecting Paper” on page 6).

■

Make sure your paper is not damaged, old, dirty,
or loaded face-down. If it is, load new paper with
the whiter or glossier side face-up.

Your printout is grainy.

■

If you are printing or copying a photo, make sure
you are not enlarging it too much. Try printing it
smaller.

■

Align the print head (

“Aligning the Print

Head” on page 23).

You see incorrect or missing colors.

■

Clean the print head (

“Cleaning the print

head” on page 23).

■

The ink cartridges may be old or low on ink.
Replace the ink cartridges (

“Replacing Ink

Cartridges” on page 19).

■

Make sure you loaded the right paper and
selected the correct setting for it on the control
panel.

The image size or position is incorrect.

■

Make sure you loaded the right paper and
selected the correct setting for it on the control
panel.

■

Make sure the original is placed correctly on the
document table (

“Placing Originals on the

Document Table” on page 8).

■

Clean the document table (

“Cleaning This

Product” on page 24).

Other problems

When you turn off the product, a red lamp inside
the product may remain on.

■

The lamp will stay on for a maximum of 15
minutes, then go out automatically. This does
not indicate malfunction.

Содержание Stylus CX5900 Series





































Результаты поиска

Содержание Stylus CX5900 Series

Отзывы:

Бренды по названию

Популярные бренды

Epson Stylus CX5900 Series, Руководство пользователя

Результаты поиска

Содержание Stylus CX5900 Series

Отзывы:

Бренды по названию

Популярные бренды