manualshive.com logo in svg

Epson SC-F500 Series, Руководство пользователя

Поделиться
Скачать
Epson SC-F500 Series Скачать руководство пользователя страница 112

E

While holding the ink bottle upright, turn the cap
slowly to remove it.

c

Important:

❏

Be careful not to spill any ink.

❏

Do not touch the top of the ink bottle after
removing the cap; otherwise you may be
smeared with ink.

F

Check the color of the ink, align the top of the ink
bottle with the filling port, and then inert it
straight into the port.

❏

Ink pouring starts automatically. If the ink does
not start pouring, try re-inserting the bottle. If
the colors of the ink do not match, the ink does
not pour.

❏

Ink pouring stops automatically when it
reaches the upper line. Even if there is ink
remaining in the bottle, do not try to force it
into the tank. You can use the remaining ink
later.

c

Important:

❏

Do not hit the top of the bottle when the
cap is removed. Otherwise, ink may leak.

❏

Do not grip the bottle too tightly.
Otherwise, ink may leak.

Note:

If the ink does not start flowing into the tank,
remove the ink bottle and try reinserting it.

G

When ink refilling is complete, remove the
bottle.

SC-F500 Series     User's Guide

Maintenance

 

112

Содержание SC-F500 Series




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды