Epson S5U1C60N08E, Руководство пользователя

Страница: 13 / 20

S5U1C60N08E MANUAL
EPSON
7
(EVALUATION BOARD FOR S1C60N08)
4 CABLE CONNECTION
4 CABLE CONNECTION
This section describes how to connect the power cable to the S5U1C60N08E, and the
S5U1C60N08E to the ICE and the target system.
Note: Turn the power of all equipment off before connecting or disconnecting cables.
4.1 Connection to ICE
The S5U1C60N08E is connected to the ICE by connecting the two interface cables (F1 and F5). Use
S5U1C60N08E connectors F1 and F5 with the projections facing outwards. Use ICE connectors F1 and F5
with the projections facing inwards (cable side).
Figures 4.1.1 and 4.1.2 show the external view and connection diagram of the ICE interface cable.
2 1
50 49
2 1
50 49
:
:
:
:
: :
:
:
:
: :
:
:
:
: :
:
:
:
:
ICE side S5U1C60N08E side
Fig. 4.1.1 External view of the ICE interface cable
ICE S5U1C60N08E
F1 connector
→
Red mark
F5 connector
→
←
F1 connector
←
F5 connector
Fig. 4.1.2 Connection diagram
Note: The S5U1C60N08E has an external power input connector for +5 V (V
DD
) and GND (V
SS
). Leave
these connectors unconnected when the S5U1C60N08E is connected to the ICE.