1. Overview
1. Overview
S5U1C17611T2 (S5U1C17611T2: Software Evaluation Tool for S1C17611) is an evaluation and development
support board for the S1C17611 single-chip microcontroller made by Seiko Epson.
S5U1C17611T2 has built-in S1C17611 and crystal unit, and the terminals of S1C17611 are outputted at the
through holes on the board.
S5U1C17611T2 can be used as the software development environment of S1C17611 by connecting to the
S5U1C17001H (ICD mini) and S5U1C17002H (ICD board) emulators made by Seiko Epson.
1.1 Usage
Method
The software development environment of S1C17611 can be built through the following steps.
<When S5U1C17001H (ICD mini) is used>
(1) Connect ICD mini to J2 and J6 of S5U1C17611T2 using the dedicated cable that comes with the ICD
mini.
*
1
(2) Provide power supply
*
2
through connector (J8) for power supply.
(3) Connect ICD mini to PC
*
3
using the USB cable that comes with the ICD mini.
<When S5U1C17002H (ICD board) is used>
*
4
(1) Connect ICD board to J1 of S5U1C17611T2 such that the pin numbers on both sides match.
*
5
(2) Connect ICD board to PC
*
3
using the USB cable that comes with the ICD board.
*1 For the connection between ICD mini and S5U1C17611T2, refer to the S5U1C17001H user manual.
*2 It is prohibited to apply voltage in excess of the supply voltage input range of S1C17611. For the supply
voltage input range of S1C17611, refer to the S1C17611 technical manual.
*3 It is necessary for the software development tool (S5U1C17001C) to be installed.
*4 Simultaneous power supply from ICD board and power supply connector (J8) is prohibited. It causes
damage to S5U1C17611T2.
*5 3.3V supply voltage is provided to S5U1C17611T2 by connecting to ICD board.
S5U1C17611T2 Manual
Seiko Epson Corporation
1
(Rev.1.0)
