4. Board Inspection Function Operation
S5U1C17602T1100 Software Manual
EPSON
7
4. Board Inspection Function Operation
4.1 Function
overview
The sample applications include the following board inspection functions.
Inspection
sequence
Function
Description
1
Switch inspection
Examines SW1 to SW4 input.
2
LCD panel inspection
Examines LCD panel display.
3 Battery
inspection
Displays battery level in volts.
4
Illuminance sensor (ADC) inspection
Performs inspection to determine whether the illuminance
sensor is connected correctly.
5 Temperature/humidity
sensor
(RFC)
inspection
Performs inspection to determine whether temperature/humidity
sensor is connected correctly.
6
Infrared inspection
Performs inspection to determine whether remote control
communication is possible.
4.2 Board inspection [TEST MODE]
Select TEST MODE from the menu, as described in “2.2 Run Procedures” in this document, then press SW1 or the rotary SW.
This launches the program and starts the board inspection.
4.3 Switch
inspection
This inspection confirms that the correct input has been obtained when SW1, SW2, and the rotary SW are pressed.
[Inspection details]
Has a SW1 input been detected?
Has a SW2 input been detected?
Has a rotary SW input been detected?
Has a rotary SW rotation to clockwise been detected?
Has a rotary SW rotation to counterclockwise been detected?
[Inspection method]
Press SW1 as indicated on the LCD.
The program proceeds to the SW2 inspection once the SW1 input has been correctly detected.
Inspect SW2 and the rotary SW in the same way.
LCD panel inspection begins once switch inspection is complete.
Содержание S5U1C17602T1100
Страница 1: ...Software Manual S5U1C17602T1100 SOFTWARE EVALUATION TOOL FOR S1C17602 ...
Страница 3: ......