Chapter 3 Installation and Configuration
S5U13719P00C100 Evaluation Board User Manual (Rev. 1.1)
EPSON
7
Chapter 3 Installation and Configuration
The S5U13719P00C100 evaluation board incorporates a DIP switch, jumpers, and 0 ohm resistors which allow it to
be used with a variety of different configurations.
3.1 Configuration DIP Switch
The S1D13719 has configuration inputs (CNF[7:0]) which are read on the rising edge of RESET#. An 8-position
DIP switch (SW1) is used to configure the S1D13719 for multiple Host Bus Interfaces. The following figure shows
the location of DIP switch SW1 on the S5U13719P00C100.
Figure 3-1: Configuration DIP Switch (SW1) Location
SW1
