Epson PX650 Series, Руководство по обслуживанию

Страница: 44 / 166

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635 Revision C
TROUBLESHOOTING Troubleshooting When There is Error Display 44
Confidential
3.2.2 Warning List
Scanner Fatal Error A scanner error has occurred. See your documentation. An error has occurred in the scanner mechanism.
Turn off the power.
See "3.3.5 Troubleshooting for Scanner"
(p.58)
Scanner Open Error Close the scanner unit.
The scanner unit is opened during stand-alone printing,
copying, or printing from an external device.
Close the scanner unit.
Table 3-1. Error List (continued)
Error Name Displayed Message Occurrence Condition Recovery Procedure
Table 3-2. Warning List
Warning Name Displayed Message Occurrence Condition Recovery Procedure
Waste fluid is near end
The printer’s ink pads are nearing the end of their service life.
Contact Epson Support. The waste ink pads have already absorbed waste ink nearly
to its full capacity.
Replace the waste ink pads.
See "6.1.1 Maintenance Error"
(p.131)
Set the CD-R/DVD tray
(Set correctly) The CD/DVD tray is set incorrectly. Set the CD/DVD tray
correctly, then press the Start button. At start of printing, the printer has not recognized the CD-R/
DVD tray correctly. Set the CD-R/DVD tray correctly, and
press the Start button.
CD/DVD guide warning
(Close error)
The front tray is in the wrong position. Push down the tray lever
to set the front tray to the CD/DVD position.
The printing data for CD/DVD printing has been sent from
the printer driver but the Stacker Assy is on the ASF
position.
Push the lever down to change the
Stacker Assy to CDR position.
CD/DVD guide close error
Position of CD/DVD guide
(Re-set) The front tray is in the CD/DVD position. Raise the tray lever to
set the front tray to the paper position. The printing data for normal printing has been sent from the
printer driver but the Stacker Assy is on the CDR position. Push the lever up to change the
Stacker Assy to ASF position.
BT File size error The document is too large to print with Bluetooth. Data size is too big.
Change or check the transmitted data.
BT Designation error The document is too complex to print with Bluetooth. Data quantity exceeded the range where it can be processed.
BT structure error Data error. The document cannot be printed. There is an error in the contents of data.
A part of the reference object
is broken (BT-MIME) Data Error.
The document may not be printed correctly.
While XHTML-Print data could be decoded, a part or all of
the reference object had a MIME encode error and could not
be obtained. The following two problems are considered
depending on the type of the un-obtained reference object.
• For an image, an area where that image is to be printed
becomes blank.
• For a CSS (style sheet) file, the background color, basic
character size or the like cannot be the same as specified
by the sending side.
BT communications error
Bluetooth print adapter not recognized. Please remove and
reinstall the adapter. An error has occurred in communication with the BT
adapter. Remove the BT adapter. Press the OK
button to clear the message.