Epson PS-500 Series, Руководство пользователя

Страница: 51 / 54

Troubleshooting

51
Problem Solving
Check each item.
Problem Solution
Basic Action
Nothing on the display. After buying the product, the PS-500 is in
battery protection mode. Set product to the
cradle and connect to a USB port to charge the
device and terminate the battery protection
mode.
“Getting Started” on page
15
The product is not responding
according to the performed
operation Check the battery level and charge the device if
necessary.
Charging
The device does not charge
when set to the cradle.
Charging stops frequently. Charge in an environment where the
surrounding temperature is 5 to 35
℃
Some PCs may not support the product.
If you are connecting the charging cradle via a
USB hub it may not charge. In this case please
connect directly to the USB port of the PC.
Clean the contact points of the product and
charging cradle.
“Looking after your device” on page 43
The product and charging cradle
heat up while charging.
The product or cradle might be faulty.
Immediately stop using the product and cradle,
and contact our service center.
A charging error is being
displayed.
Charge in a location with an operating
temperature of 5 to 35
℃
.
Water Resistance
Can I use the product while
swimming or diving? The product is water resistant to 3bar. The
product is not designed for swimming or diving.
The inside of the glass where
the sensor is located is cloudy.
Temporary clouding will not affect the product.
Use it as is. If the clouding does not clear up
after some time, water may have entered the
product.
Data Transfer
Data transfer is not possible
even though the product is
connected to a smart device.
Refer to the Bluetooth® section in this manual
to resolve pairing issues.