Epson ProSense 307, Руководство пользователя

Страница: 28 / 87

28
Parent topic: Configuring Your Watch
Acquiring a GPS Signal
To ensure the accuracy of the measurements taken by your watch, you must position yourself to acquire
a strong GPS signal. GPS positioning allows your watch to receive a GPS signal and timing information
so it can correctly track your routes, distance, pace, and other workout and activity data.
For increased GPS accuracy, wait at least 15 minutes before starting your workout. You only need to
perform this extended GPS calibration the first time you use the watch or if you do not use it for a few
months.
Note: To reduce the time it takes to locate the GPS signal, you can use the AGPS feature in the Epson
View app on your smartphone. If you keep your watch connected to your smartphone, your watch
automatically downloads GPS updates once an hour.
When positioning yourself to acquire a GPS signal, avoid the following environments:
• Inside buildings or rooms, or underground areas or tunnels
• Near high-voltage wires, television towers, tall buildings, tall trees, or overhead electrical wires for
trains or buses
• Locations with concentrated electronic interference, such as construction sites and heavy traffic
• Under water or floating on water
If you have issues acquiring a signal, move into as open an area as possible. If you still cannot acquire a
signal, select
Skip on the GPS screen to start your workout. Distance traveled will be estimated based
on your stride until the GPS signal is fully acquired.
Parent topic: Setting Up the Product
Related references
Solutions to GPS Signal Problems