Solving Problems
115
The image contains static, noise, or distortion.
■
If you’re using a video player, make sure the correct
Video Signal
is selected in the Video menu (see page 75).
■
If you’re using a computer, press the
Auto
button (on the remote
control) or the
Auto/Enter
button (on the projector). This
automatically resets the tracking, sync, position, and resolution.
■
If you’re using a computer cable longer than 6 feet (2 meters), or
an extension cable, the image quality may be reduced.
■
Keep your computer and video cables away from the power cord
as much as possible to prevent interference.
■
The video signal may be split between the computer and the
projector. If you notice a decline in the projected image quality
when the image is displayed simultaneously on your notebook
and through the projector, turn off the notebook’s LCD display.
The image is blurry.
■
There may be dirt or smears on the lens. Clean the lens as
described on page 100.
■
Adjust the focus using the
Focus
buttons.
■
Make sure the lens is not fogged up by condensation. You may
need to wait before using the projector after moving it from a cold
environment to a warm environment.
■
If you’re projecting from a computer, press the
Auto
button (on
the remote control) or the
Auto/Enter
button (on the
projector). This adjusts the tracking, sync, position, and
resolution settings.
■
Adjust the
Sharpness
setting on the Video menu (see page 68).
When you change video settings, you should be able to see the
effect on the screen immediately.
Содержание PowerLite 9300i - PowerLite 9300NL Multimedia Projector
