Epson PowerLite 1716, Руководство пользователя

Страница: 90 / 157

90
Setting Up Network Projection
Connecting to a Wired Network
With the optional wired LAN module, you can connect the projector
to your network and configure it with an IP address. This provides an
alternative to connecting to the projector wirelessly.
1. If the optional wireless module is installed in the projector,
remove it as described on page 89. Then insert the wired LAN
module into the projector and replace the cover plate.
2. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the
LAN
port on the projector.
3. Point the remote control at the projector and press the
P Power
button.
4. Press the
EasyMP
button on the remote control to select EasyMP
as the source.
5. Press the
Menu
button on the remote control, select the
Network
menu, then press
Enter
.
6. Choose
Network Configuration
and press
Enter
.
7. Choose
Wired LAN
and press
Enter
. You see the following
screen:
note
Only the Epson Ethernet
adapter is guaranteed to
work. Other brands may not
be compatible.
If you see a message asking
you to insert a LAN or
memory card, check to make
sure your Ethernet adapter is
properly inserted.