Epson PowerLite 1716, Руководство пользователя

Страница: 69 / 157

Setting Up Network Projection
69
9. Select
Internet Protocol
and click the
Properties
button. You
see this screen:
10. If your access point uses DHCP, select
Obtain an IP address
automatically
. Otherwise select
Use the following IP address
and enter the required information:
■
IP address
: Type in the IP address you want to assign to the
computer. It must be formatted like other addresses on the
network. The last section must be unique.
■
Subnet mask
: For example: 255.255.255.000, but this
depends on how your network is set up.
■
Default gateway
: Enter the IP address that was assigned to
the access point when it was set up.
■
Preferred DNS server/Alternate DNS server:
Enter the IP
address of the DNS server(s) for your network.
11. When you’re done, click
OK
.
note
For specific details about
your network, please consult
your network administrator.
note
If you don’t know your
gateway or access point
address, see page 71.