
52
Viewing and Managing Your Photos
Exporting photos to a computer
c
Caution:
Make sure the camera’s power is turned off before you begin.
1.
Open the connector cover carefully, and connect the PC cable from the camera to the computer.
Note:
Depending on the OS of your computer, you may have to install driver software. The driver software
can be found on the CD-ROM that is included.
2.
Turn the camera on.
3.
Move the photos in the camera to your computer with a software. For details, see Chapter 6,
“Operating the Software,” page 65.
Note:
❏
If image software is not installed on your computer, you can only copy photos in the camera to the
computer.
❏
When images that were taken using the P.I.F. mode are copied to your computer, the link between
the photos and the frames will be broken.
Working with photos on a computer
There is software on the CD-ROM that you can use to manipulate the photos on your computer.
For details about the software, see Chapter 6, “Operating the Software,” page 65.
Содержание PhotoPC L-410
Страница 1: ...1 English User s Guide ...