Epson PhotoPC 2100Z, Руководство по обслуживанию

Страница: 17 / 108

PhotoPC 2100Z Revision B
Product Description Functional Specifications 11
1.3.4 Playback Mode Functions
†
Display in information zone
Displays the following information in the “information zone” while in playback mode.
„
Displayed frame number / DPOF number of prints / PIM setting/ total DPOF
number of prints / resolution / battery status / cursor
†
Image playback
95% framing display is performed, but only with an aspect ratio of 3:2 only.
†
One-by-one image playback (forward/backward)
Images are displayed one by one by switching. Images are scrolled by means of the W/
T button.
†
High-speed one-by-one image playback (forward/backward)
When the W/T button is held pressed at a 9-division display, the camera performs
high-speed one-by-one image playback.
†
Split display
The LCD shows nine images at a time.
†
Magnification display
„
Magnifies the image twice on the display.
„
Smooth scrolling is possible.
„
The zoom display icon indicates the magnified area.
†
Deletion
Single image deletion and all images deletion (including deletion of DPOF setting and
PIM setting) are possible.
†
DPOF (number of prints)
„
Permits setting of the DPOF number of prints. A maximum of 9 prints for one
image are allowed.
„
If the DPOF file is write-protected or broken, a new DPOF file will be created
and the old DPOF file will be deleted.
†
Brightness compensation (User PIM)
„
Brightness compensation: Can be turned on or off.
„
Turning on or off is permitted irrespective of the DPOF setting.
†
Resetting the DPOF number of prints
„
The DPOF number of prints can be reset.
„
This function is disabled (display turns gray) when no DPOF number of prints
has been set.
†
Playback of images taken with other models
The table below indicates the processing (operation) for images taken by other
EPSON's cameras.
Note: *1: The DPOF number of prints for any camera other than PhotoPC 2100Z must be
cleared before setting the DPOP number of prints (including simple DPOF setting)
with PhotoPC 2100Z.
*2: User PIM is not available for images taken with any camera other than PhotoPC
2100Z. However, User PIM of the cameras other than PhotoPC 2100Z can be
maintained.
†
Writing DPOF and PIM data in the CF card
„
The camera writes the PIM data in the CF card immediately after setting and
the DPOF data at mode switching.
„
If the batteries are removed during DPOF and PIM setting, the camera
perform PIM writing in the CF card but dose not write PDOF.
Table 1-7. Processing (Operation) for Images Taken
by Other EPSON's Cameras
Function
PhotoPC 800
PhotoPC 850Z
PhotoPC 3000Z PhotoPC 3100Z
Image file playback (DCF) Available Available Available
DPOF Not available Not available Available
*1
User PIM - - Not available
*2
TIFF image playback - Thumbnail display Thumbnail display
Motion picture playback - Not available Not available