Epson Perfection 636U, Руководство пользователя

Страница: 21 / 51

16
7. After the scanner software installation is complete, the EPSON Screen
Calibration utility automatically starts. You must calibrate your screen and
scanner to reproduce images closely matching the originals.
You don’t need to change the screen calibration again so long
as you continue to use the same monitor. If you need to
recalibrate your screen at a later time, click
Scanners and
Cameras in the Control Panel. On the Devices tab, select
Scanner . Click Properties , then click the Calibration button.
In the following window, move the slider to the right or left until the shades of the
horizontal gray stripes appear similar. View the screen from a short distance. The
gray stripes will not perfectly blend together; however, try to make the two tones
match as closely as possible.
8. Click
OK
to register the calibration setting.
9. Click
Finish
to exit the Add New
Hardware Wizard.
before calibration after calibration