32
For Wireless Network Users
18
One-push configuration
using WPS or AOSS™
(Windows
®
and
Macintosh)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
c
On your machine, press
Menu
.
Press
s
or
t
to display
Network
, and then
press
Network
.
Press
WLAN
.
Press
s
or
t
to display
WPS/AOSS
, and then
press
WPS/AOSS
.
When
Network I/F switched to
Wireless.
is displayed, press
Yes
to accept.
This will start the wireless setup wizard.
To cancel, press
No
.
d
When the LCD shows
Start WPS or AOSS
,
press the WPS or AOSS™ button on your
wireless access point/router. See the user’s
guide of your wireless access point/router for
instructions.
Then press
OK
and your machine will now
automatically detect which mode (WPS or
AOSS™) your wireless access point/router
uses and try to connect to your wireless
network.
e
A connection result message appears for
60 seconds on the LCD and a WLAN report will
automatically be printed.
If the connection failed, check the error code on
the printed report and refer to
Wireless setup is now complete. A four
level indicator at the upper left of your
machine’s LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite, continue to
step
19
.
For Windows
®
Users:
Now go to
Page 35
For Macintosh Users:
Now go to
Page 38
Note
If your wireless access point/router supports WPS
(PIN Method), you can also configure your
machine using the PIN (Personal Identification
Number) Method.
uu
Network User’s Guide:
Configuration using the PIN Method of Wi-Fi
Protected Setup
