background image

82

Notices

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC 
Certification of this device and may cause interference levels which exceed the limits established by the FCC for 
this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this 
device. If this equipment has more than one interface connector, do not leave cables connected to unused 
interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to 
operate the equipment.

For Canadian Users

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 
Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.

Copyright Notice

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in 
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior 
written permission of Seiko Epson Corporation. The information contained herein is designed only for use with 
this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for 
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of 
this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to 
strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or 
any consumable products other than those designated as Original Epson Products or Epson Approved Products by 
Seiko Epson Corporation.

A Note Concerning Responsible Use of Copyrighted 
Materials

Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product. 
While some countries’ laws permit limited copying or reuse of copyrighted material in certain circumstances, those 
circumstances may not be as broad as some people assume. Contact your legal advisor for any questions regarding 
copyright law.

Содержание Megaplex MG-50




















































































Отзывы: