Thickness
0.12 to 0.39 mm (0.0047 to 0.015 inch)
Weight
40 to 58 g/m² (12 to 15 lb)
Binding
Line-glued at the top of form
Envelopes: paper guide entry
Size
No. 6: 165 × 92 mm (6.5 × 3.6 inches)
No. 10: 241 × 105 mm (9.5 × 4.1 inches)
Thickness
0.16 to 0.52 mm (0.0063 to 0.0205 inch)
Weight
45 to 90 g/m² (12 to 24 lb)
Continuous paper (standard and multipart): rear entry
Width
101.6 to 254 mm (4.0 to 10.0 inches)
Length (one page)
101.6 to 558.8 mm (4.0 to 22.0 inches)
Copies
1 or up to 4 copies
Thickness
0.065 to 0.39 mm (0.0025 to 0.015 inch)
Weight
(not multipart)
52 to 82 g/m² (14 to 22 lb)
Weight
(one sheet of multipart)
40 to 58 g/m² (12 to 15 lb)
Binding
Point glue or paper staple on both sides
Roll paper: rear entry with optional roll paper holder
Width
216 mm (8.5 inches)
Thickness
0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Weight
52 to 82 g/m² (14 to 22 lb)
Recommended printable area
Note:
For best results, print within the recommended printable area. The printer may not print outside this area.
Single sheets and envelopes:
A
The minimum top margin is 4.2 mm (0.17 inch).
B
The minimum left and right margins are 3.0 mm (0.12 inch) each.
For single sheets the maximum paper width is 257 mm (10.1 inches).
The maximum printable width is 203.2 mm (8.0 inches). If the paper size is substantially wider than this,
the side margins will be wider than the minimum, but the printable width does not increase beyond 203.2
mm (8.0 inches).
C
The minimum bottom margin is 4.2 mm (0.17 inch).
